- Grease feeding interval
The service life of grease enclosed in the housing
can be determined from Fig. 9-1.
Add or replace grease before the end of the service life determined
from Fig. 9-1.
If a reduced amount of grease is initially enclosed to accommodate
high speed, remove old grease to the extent that fresh grease is added.
To determine regreasing interval, use the Menu entitled Grease Feeding
- Grease life in shielded/sealed ball bearing
The service life of grease enclosed in single-row deep-groove ball bearings,
closed with a seal or a shield, can be estimated by the
To determine accurate grease service life, use the Menu entitled Grease
Life of Shielded/Sealed Ball Bearings.